How do I mount the EB-L200SW / EB-L200SX series onto the ELPMB45 short-throw mount?

EB-L200SW
EB-L200SX
ELPMB45

Information:

The EB-L200SW and EB-L200SX are classified as ‘short throw’ projectors, with a throw ratio of 0.55 – 0.74:1.

This means to get an image size of around 80 inches diagonally, the projector will need to be positioned between 0.89 – 1.2 meters away from the projected image.

For more information, see the Epson Throw Distance calculator:

When using this projector series with a wall mount, there are two options available:

ELPMB64
ELPMB45

Warning:
When you mount the projector on the wall with the wall mount, the wall requires enough strength to hold the projector, the wall mount, and cables. This wall mount should be installed on a concrete wall. Confirm the weight of the projector, the wall mount, and cables before installation, and maintain the strength of the wall. If the wall is not strong enough, reinforce the wall before installation. Before starting the installation, carefully check the construction, material, and strength of the wall. Install the mount firmly to hold the weight of the projector and the mount, and to resist horizontal vibration. Use M8 nuts and bolts. Nuts and bolts smaller than M8 could cause the mount to fall. Epson accepts no responsibility for any damage or injury caused by lack of wall strength or inadequate installation

Warning:

When you mount the projector on the wall with the wall mount, the wall requires enough strength to hold the projector, the wall mount, and cables. This wall mount should be installed on a concrete wall. Confirm the weight of the projector, the wall mount, and cables before installation, and maintain the strength of the wall. If the wall is not strong enough, reinforce the wall before installation.
Before starting the installation, carefully check the construction, material, and strength of the wall.
Install the mount firmly to hold the weight of the projector and the mount, and to resist horizontal vibration. Use M8 nuts and bolts. Nuts and bolts smaller than M8 could cause the mount to fall.
Epson accepts no responsibility for any damage or injury caused by lack of wall strength or inadequate installation

Instructions for ELPMB45

As there are no specific instructions available for mounting the Projector Plate onto the EB-L200SW or EB-L200SX series that is supplied with the ELPMB45, please see the below as guidance.

The remaining instructions provided with the ELPMB45 can be followed as normal. These are available from the following link:
https://download.epson-europe.com/pub/download/5126/epson512607eu.pdf

Using the supplied ELPMB45 Projector Plate:

Fix points A, B and C shown in the images below.

Warning:
Tighten all screws firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage. If you apply adhesives to prevent the screws from loosening, or if you use lubricants or oils on the wall mount plate fixing points, the housing may crack and cause the projector to fall, resulting in personal injury or property damage. Do not use adhesives, lubricants or oils to install or adjust the mount.

Warning:

Tighten all screws firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage.
If you apply adhesives to prevent the screws from loosening, or if you use lubricants or oils on the wall mount plate fixing points, the housing may crack and cause the projector to fall, resulting in personal injury or property damage. Do not use adhesives, lubricants or oils to install or adjust the mount.

Instructions for ELPMB64

For instructions on using the ELPMB64, please see the installation manual and projectors user guide.

These are available from the following link:
https://support.epson.net/setupnavi/

Important

Installation, removal, and servicing of the projector should only be performed by a qualified technician. See the User’s Guide included with your projector for information about maintenance and repairs

Warning:
Never loosen the bolts and nuts after installation. Confirm on a regular basis that the screws have not become loose. If you find any loose screws, tighten them firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage. Do not hang on the mount or hang a heavy object on it. If the mount or the projector falls, it could cause personal injury or property damage.

Warning:

Never loosen the bolts and nuts after installation. Confirm on a regular basis that the screws have not become loose. If you find any loose screws, tighten them firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage.
Do not hang on the mount or hang a heavy object on it. If the mount or the projector falls, it could cause personal injury or property damage.