Epson RC800-A Controller

SKU: 2231684

Epson RC800-A Controller

  1. New
Missing product image
SKU: 2231684

Powerful universal controller

  • Powerful robot control system Synchronise robots using tasks and markers
  • Multi-tasking Process up to 48 tasks at once
  • Open system architecture Communicate with all common field bus systems
Where to buy
Overview

Overview

Overview

The Epson RC800-A is designed for the new generation of robots featuring Epson RC+ 8

Open system architecture

The Epson RC800-A can communicate with all conventional field bus systems and is open for the connection of lower and higher level controllers, sensors, actors, conveyor belts and other peripherals. This means that the RC800-A can take over all robot control, motion control and process control functions.

Multitasking specialist

If robots and peripherals are connected to the controller, the RC800-A’s multi-tasking ability enables you to use your system more effectively and with less susceptibility to problems. Synchronisation takes place using markers and without additional wiring being required. The RC800-A can process 48 tasks.

Ready to use

Built-In conveyor tracking for two channels and force sensor slots allow fast intergration.

What is in the box?

Epson RC800-A Controller whats in the box
  1. Connector for standard I/O
  2. Emergency stop connector
  3. Epson RC+ program CD including simulation software
  4. Installation/safety manual
  5. TP/OP bypass plug (installed before shipment)
  6. USB cable
  7. User manual (CD)

Tech Specs

The product features and specifications are subject to change without prior notice

General

Development Environment
EPSON RC+ 8.0 Basic, EPSON RC+ 8.0 Lite, EPSON RC+ 8.0 Premium, EPSON RC+ 8.0 Standard
Programming Language
Epson SPEL+ (multitasking possible)
DRAM
512MB - expandable to: 2GB
Safety features
AC power supply voltage reduction detection, Motor overload detection, Irregular motor torque (out-of-control Manipulator) detection, Dynamic brake, emergency stop switch, Fan error detection, Low power mode, Memory check-sum error detection, Motor speed error detection, over-voltage, Overheat detection at the Motor Driver Module, Positioning overflow - servo error - detection, Relay welding detection, Safety door input, Speed overflow - servo error - detection, Temperature error detection
Hardware Options
Expansion I/O (24/16, up to 4 additional cards), Fieldbus I/O master (DeviceNet, Profi bus, Ethernet/IP, 1 additional card each possible), Fieldbus I/O slave (DeviceNet, ProfiNet, ProfiBus, CC-Link, Ethernet/IP, EtherCAT, 1 additional card each possible), Pulse generating (4 channels per card, up to 4 additional cads), RS-232C (2 channels per card, up to 2 additional cards), Teach pendant, operator pendant
Software Options
Code Reading (OCR recognition), Epson RC+ 8.x API License, Epson RC+ 8.x Conveyor Tracking License, Epson RC+ 8.x Express Advanced License, Epson RC+ 8.x External Control Point License, Epson RC+ 8.x Fieldbus Master License, Epson RC+ 8.x GUI Builder License, Epson RC+ 8.x OCR License, Epson RC+ 8.x OPC UA for Robotics Part1 License, Epson RC+ 8.x Part Feeding License, Epson RC+ 8.x Safety Function License (SLS/SLP), Epson RC+ 8.x Vision Guide License, Force Sensing
Dimensions
Base Unit: 380,4 mm x 350,4 mm x 170,4 mm (Width x Depth x Height)
Mounting option
Wall, Pedestal, Multimount
Certifications
RoHS Directive: 2002/92/EC, ANSI/RIA: R15.06-1999
Power/Voltage
200-240V AC Single Phase
Ambient temperature
5 ° C - 40 ° C
Relative Humidity
20 % - 80 % (no condensation)
Interfaces
RS-232C, USB 2.0-A (2x), Ethernet interface (100 Base-TX / 10 Base-T), 24/16 Standard E/A Channels
Supply Voltage
AC 200 V - 240 V, 50 Hz - 60 Hz